GrabCAD 模型信息
Hydroponic Rockwhool Ring Holder (for 4" ABS) · 模型 115883
Hydroponic Rockwhool Ring Holder *(for 4" **ABS** pipes)* Hold hydroponic, aeroponic or aquaponic plants in by their rockwhool cubes. Avoid using baskets that offers no lateral stability and often end up in pieces when you have to cut to extract the plant without killing it. You will need: * 4x ~5mm x ~40mm compression springs (two by arm). * 2x M3 x 8mm screws. (one by arm). Recommendations: https://www.amazon.ca/gp/product/B07BK3XTXJ/ref=ppx_yo_dt_b_asin_image_o00_s00?ie=UTF8&psc=1 https://www.amazon.ca/uxcell-Stainless-Steel-Phillips-Screws/dp/B012TE12CY/ref=sr_1_28?dchild=1&keywords=m3+screw+hdd&qid=1599246437&refinements=p_85%3A5690392011&rnid=5690384011&rps=1&sr=8-28 Printing Quality Print with a minimum resolution of 0.30mm layer height and a maximum speed of 60mm/s, lower settings will make poor bridging around the screw tracks. If your slicing software allow variable layers height, print 0.30mm layers til the last 3mm of the print then ~17mm for the screw tracks.
- 格式
- STL、Rendering
- 分类
- Agriculture
- 标签
- rockwhool、hydroponics、hydroponic、basket、aquaponics
- 数据更新
- 2026-09-10T12:52:07Z
