JavaPresse 3D Printed Drill Attachment 模型预览

GrabCAD 模型信息

JavaPresse 3D Printed Drill Attachment · 模型 340397

作者:Kevin Sullivan

This is a 3D model of a drill attachment for a JavaPresse. It has a hex on the back for drill attachment and a penta-socket on the other for the JavaPresse top. The penta-socket is a rather snug fit, but goes on and off with little trouble. Due to differences in 3D printers, the side length of the penta-socket may need to be changed for scaling purposes. This can be done in the Inventor model, or in most 3D modeling software by changing the scale of the part up or down. This size worked well in my MakerBot Mini. When 3D printing, I do suggest printing the model as a "solid" material so it is stronger. I did include a small, 1/8 inch (0.125 inch) thick, test piece of the penta-socket for test printing. This will allow you to print a small portion of the part to save material and time while you attempt different scales to find out what will work best on your own printer. There are two different models here, one for a 1/2 inch (0.5 inch) drill chuck and another for a 3/8 inch (0.375 inch) drill chuck.

格式
Autodesk Inventor、STL、Rendering
分类
3D printing、Energy and Power、Household
标签
coffee、javapresse、drill、attachment、pentasocket、penta-socket、pentagon、socket
数据更新
2026-09-10T12:15:18Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。