Klover Extruder V1.4 - Creality CR-10 CR10 MAX direct drive extruder 模型预览

GrabCAD 模型信息

Klover Extruder V1.4 - Creality CR-10 CR10 MAX direct drive extruder · 模型 393510

作者:rosinbole

Klover Extruder V1.4 A direct drive extruder conversion for the Creality CR-10 series of 3D-printers using only the standard extruder parts. It can also be used in a Bowden setup if so desired. You will need an assortment of M3 screws from 6-35mm in length, a couple of M3 nuts, and an extension cable for the extruder stepper motor. V1.4 fixes and improvements: • More restrained path for the PTFE tube after extensive issues with the PTFE tube bending just above the hotend. V1.3 fixes and improvements: • Improved part cooling. • The filament gear tension screw is now accessible from beneath the extruder without any disassembly - as shown in one of the images. • Some other small changes have been made, so the extruder is now easier to assemble and disassemble than ever. V1.2 fixes and improvements: • Improved printability - both less support and less time to print. • M3 nuts added at the structurally important fastening points instead of just threads in the plastic. • The rigidity of the PTFE tube internally in the hotend has been improved by adding two support plugs in the thread where the quick disconnect fittings for the PTFE tube were previously. V1.1 fixes and improvements: • Improved rigidity of the stepper bracket. • Improved rigidity of the energy chain mounting point. • The part cooling bracket sagged because of prolonged heat exposure when not running the part cooling fan. The part cooling bracket has been redesigned to resolve the issue. • Small irregularities in the CAD model have been fixed. As far as I know, the CR-10 series all share the same Z-assembly and hotend carriage, so this should work on all models of the CR-10 series. This extruder has only been tested on a CR-10 max, so I will not guarantee the fitment on other models. Credit to Nguyen Nhu Tuan for the model of the frame I designed this around. https://grabcad.com/library/creality-cr-10s-pro-basic-frame-1

格式
Rendering、STL、STEP / IGES
分类
3D printing、Machine design、Tech
标签
creality、direct、drive、extruder、3d、printing、direct drive、cr-10、cr10、cr10-max、cr-10 max、cr10max
数据更新
2026-11-18T21:46:57Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。