GrabCAD 模型信息
Laptop Stand 3D Printable for ~13" · 模型 129527
Laptop stand in two versions. Light one for ultrabooks and fast printing. Heavy one for beefier laptops. It has an angle of 22° and spans 285mm x 230mm for the light- and 310mm x 230mm for the heavy version. PARTS NEEDED light: 6 x threaded inserts M3 6 x screw M3 x 20mm PARTS NEEDED heavy: 6 x threaded inserts M3 6 x screw M3 x 30mm NOTE: you can also just screw the screws directly into the plastic. However you will need to change the diameter of the holes. PRINT SETTINGS: - 0.28 mm height should be good enough (I went with 0.2mm) - No support required. - I would recommend a brim adhesion, especially for the rods. - PETG recommended. If you don't have a printer, you can print it from https://www.jawstec.com/3d-printing-service/ or another online printer. Credits to https://grabcad.com/justin.mckee-2 for the laptop
- 格式
- STEP / IGES、Autodesk Inventor、Fusion 360、Rendering
- 分类
- 3D printing、Furniture、Interior design
- 标签
- furniture、printing、3d、desk、setup、stand、laptop
- 数据更新
- 2026-10-19T04:25:25Z
