LASER ENGRAVER ROTARY CHUCK Small double chuck 模型预览

GrabCAD 模型信息

LASER ENGRAVER ROTARY CHUCK Small double chuck · 模型 406928

作者:Hassan Ahmed

Small in size, works from both directions to save some time It is possible to install one chuck or both together to save some time and drill two parts at the same time. https://www.youtube.com/watch?v=OR5oWseC-ZI •3-jaw chuck 50mm is suitable for catching small parts during the laser engravings process, such as rings, wooden pens, and anything with a diameter of 25 mm or less. •The three self-centering jaws are reversible to allow the holding of larger workpieces. jaws installed in order 1, 2, and 3 to match the numbers on the housing. To fit them reversed, insert them in the order 3,2,1. Fit the slider plate into the housing and place the Circlips over the shaft to secure it. Turn the slider over so that the front end of the slider is about to pop into one of the slots. Feed into Jaw 1, large end first, and rotate the slider plate to snap it. Repeat with Jaw 2 in the next hole, then Jaw 3 in the next hole. •There are three versions of jaws that you can choose between to suit your needs. •For high envelope stability, the printed 30x1.5mm Plain External Circlips can be replaced with a metal steamer. •It can be printed with any filament. •The file contains 23 compressed files for each part and the assembly method is shown in the video https://www.youtube.com/watch?v=cu8d6MDAeH8 You can get the full version of the three-jaw chuck here https://cults3d.com/en/3d-model/tool/rotary-laser-engraver-double-and-small-chuck 3D PRINTING SETTINGS • Layer Height 0.16 • Wall Thickness 1.6 • Infill 35%: 70% • Support Structure Normal

格式
Rendering、STL
分类
3D printing、Machine design、Tools
标签
atomstack、three-jaw chuck、rotary axis、laser machine、25inch diameter、three chuck
数据更新
2026-10-31T02:16:22Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。