GrabCAD 模型信息
Library Of EATON - Directional Control Valves Electrical Coils (L Series) · 模型 49006
Library Of EATON - Directional Control Valves Electrical Coils (L Series) The Eaton L Series electrical coils, part of the ToughCoil™ family, are high-performance solenoids specifically designed for size 10 screw-in cartridge valves (SiCV), such as the ESV9 and SV9A series. These coils are engineered for reliability in harsh mobile and industrial environments, featuring a rugged encapsulated design that eliminates the need for additional water or weatherproofing. Core Technical Specifications According to Eaton Hydraulics technical documentation, L Series coils are defined by the following parameters: Power Rating: Standard L Series coils are rated at 28 Watts. Physical Dimensions: They feature an inner diameter of 17.6 mm (0.69 inches) to fit size 10 valve armatures. Encapsulation: Constructed with glass-filled nylon, providing protection against thermal shock, moisture, and physical damage. Operating Temperature: Rated for continuous duty at ambient temperatures up to 100°C (212°F). Duty Cycle: Designed for continuous operation from 85% to 110% of the nominal rated voltage. Model Codes and Configurations L Series coils follow a specific part numbering system, often starting with the prefix 309AA followed by voltage and connector identifiers. Voltage Types: DC: Standard DC windings with no internal protection. DC with Diode: Features a bi-directional or flyback diode to suppress voltage spikes. AC (Rectified): These coils include an internal full-bridge rectifier to convert AC to DC, allowing them to operate without the typical "hum" associated with AC solenoids. Connector Options: G0: ISO 4400 / DIN 43650 (Form A) connector, typically rated IP65. N0: Integrated Deutsch DT04-2P connector, providing higher protection up to IP69K. D0: Integrated Metri-Pack 150 male connector. Y0: Integrated Amp Junior Timer connector. Performance and Environmental Protection Environmental Sealing: When used with the appropriate mating connectors, L Series ToughCoils can achieve ratings of IP67 and IP69K. Thermal Shock Resistance: According to Eaton Vickers, these coils are tested using a "powered dunk test," where the coil is heated to 100°C and then immediately submerged in 0°C water while under 115% rated voltage. Insulation: Coil windings use magnet wire rated for Class N (200°C) thermal performance. Do you need a cross-reference for an older L Series part number, or are you looking for the mating connector part number for a Deutsch or DIN configuration?
- 格式
- STEP / IGES、SOLIDWORKS
- 分类
- Components、Electrical、Energy and Power
- 标签
- 未标注
- 数据更新
- 2026-10-05T06:40:41Z
