GrabCAD 模型信息
Lip Brush Holder for Vaseline 50ml Jar Lid V2 · 模型 60458
A tiny snap-in holder that mounts inside the lid of a Vaseline 50 ml jar, so your lip brush always travels with the balm. WHAT YOU GET - Two-step insertion, numbered on the part itself: slide the handle into the closed-end pocket (1), then snap the brush end into the clip (2) - Pocket (1) is closed at the far end, so the brush always seats at the same depth - Clip (2) is a flexing bridge rather than a solid wall, so it holds a range of handle thicknesses with a firm click - Holder size 47 x 10.4 x 14.1 mm - Mounts with a strip of strong double-sided tape, no screws FIT CHECK - Vaseline Original Protecting Jelly, 50 ml jar lid - Tuned around a 46 mm silicone lip applicator with an 11 x 7 mm head, the type sold in cheap multi-packs as a silicone lip brush - Slightly thicker or thinner handles still clip in - that is what the flexing bridge is for - Wipe the inside of the lid clean and dry before taping WHAT IS NEW IN V2 - Pocket (1) is now closed at the far end instead of running straight through, so insertion depth is repeatable - Clip (2) is now a bridge instead of a solid block, which adds spring and widens the range of brushes that fit PRINT SETTINGS FDM, PLA or PETG. - 0.2 mm layers / 2 walls / 15% infill - Tree supports on - the flexing bridge is printed over open space - Bundled 3MF is a Bambu Studio project for the P1S with these settings NEED A DIFFERENT SIZE? STEP file is included alongside the STL and 3MF, so you can adjust the pocket or the clip for a different applicator. LICENSE: CC BY-NC
- 格式
- STEP / IGES、3D Manufacturing Format、STL、Rendering
- 分类
- 3D printing、Household、Just for fun
- 标签
- snap fit、organizer、makeup、travel、holder、lip balm、lip brush、vaseline
- 数据更新
- 2026-10-10T13:54:34Z
