GrabCAD 模型信息
MATEKSYS H743 SLIM V3 Flight Controller · 模型 109695
FC Specifications MCU: STM32H743VIH6, 480MHz , 1MB RAM, 2MB Flash Board V1.0 IMU: MPU6000 (SPI1) & ICM20602 (SPI4) Board V1.5 IMU: MPU6000 (SPI1) & ICM42605 (SPI4) Baro: Infineon DPS310 (I2C2) OSD: AT7456E (SPI2) Blackbox: MicroSD card socket (SDIO) 7x Uarts (1,2,3,4,6,7,8) with built-in inversion. 13x PWM outputs(including “LED” pad) 2x I2C 1x CAN 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2) 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red) 1x SPI3 breakout USB Type-C(USB2.0) 1x JST-SH1.0_8pin connector (Vbat/G/Curr/Rx8/S1/S2/S3/S4) 1x JST-GH1.25_4pin connector (5V/CAN-H/CAN-L/G) Dual Camera Inputs switch 5V/Vbat filtered power ON/OFF switch DJI FPV OSD is supported by any spare UART Power Vbat Input: 6~36V (2~8S LiPo) BEC: 5V 2A cont. (Max.3A) LDO 3.3V: Max.200mA No Current Sensor built-in ADC Vbat2 pad supports Max. 69V (voltage divider: 1K:20K) Static power: 200mA@5V with Betaflight, 150mA@5V with ArduPilot FC Firmware ArduPilot(ChiBiOS): MATEKH743 BetaFlight: MATEKH743 INAV: MATEKH743 Physical Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm Dimensions: 36 x 36 x 5 mm Weight: 7g
- 格式
- STEP / IGES、Fusion 360、Rendering
- 分类
- Aerospace、Aviation、Components
- 标签
- mateksys、matek、flight controller、rc、quadcopter、drone
- 数据更新
- 2026-10-16T14:20:10Z
