MicroUSB Pinboard Case 模型预览

GrabCAD 模型信息

MicroUSB Pinboard Case · 模型 323213

作者:Gyorgy Balassy

This is a case for Conrad Bannik's https://grabcad.com/library/micro-usb-dip-5-pin-pinboard-2-54mm-1 Note that the screw holes to mount the board is offset with 1mm because the Conrad's model does not fully match with the pinboards I have. The model is parameterized, so if you don't like the tolerance or other dimensions you can open the .f3d in Fusion360 and change them. Rotate the top part upside down, and print both parts without support. The top is designed with a sacrificial layer in the screw hole to eliminate support. After printing remove the sacrificial layer from the screw hole in the top part. Use 2pcs M2x4 screws to mount the pinboard to the bottom. Use 1pc M3x4 screws to screw the to part to the bottom. Enjoy! :)

格式
Fusion 360、STEP / IGES、STL、Rendering
分类
3D printing、Components、Electrical
标签
pinboard、usb、micro
数据更新
2026-10-25T01:03:09Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。