GrabCAD 模型信息
Mill Type Cylinder (BOSCH , Rexroth) - Double Rod Cylinder(CG) - Range H3 - CGH3 - MF3. - Bore Diameter D=100 mm. - With Stroke Length S=800 mm. · 模型 309303
The CGH3 double-rod mill-type cylinder with a 100 mm bore and 800 mm stroke is a valid configuration within the Rexroth H3 series. The specific mounting style was not specified in your request, but the CGH3 series offers MF3, MT4, and MS2 mounting options . 🔧 Key Specifications: CGH3, 100mm Bore, 800mm Stroke Parameter Specification Series CGH3 (Mill-type cylinder, double rod), Range H3 Nominal Pressure 350 bar (35 MPa) Piston Diameter (ØAL) 100 mm Stroke Length (S) 800 mm Max. Available Stroke Up to 6 m for the series Piston Rod Diameter (ØMM) For a 100 mm bore in the CGH3 series, the standard rod diameter is 70 mm Mounting Options MF3 (Round flange at head), MT4 (Trunnion), MS2 (Foot mounting) ⚠️ Important Note on Admissible Stroke (Buckling) While the series supports strokes up to 6 m, the admissible stroke for a 100 mm bore / 70 mm rod configuration depends heavily on the mounting type, operating pressure, and installation orientation. For the MT4 (trunnion) mounting with a 100/70 configuration, the admissible stroke at 350 bar is approximately 785 mm (horizontal) to 810 mm (vertical) . Your requested 800 mm stroke is at the upper limit for horizontal installation at full pressure. If your application operates at a lower pressure (e.g., 210 bar), the admissible stroke increases significantly (over 1000 mm) . If you are using MF3 or MS2 mounting, the buckling limits will differ, and you should verify against the Rexroth buckling tables for your specific operating pressure. 🧾 Ordering Code Reference The ordering code structure for your cylinder follows this format : text CGH3[MF3/MT4/MS2]/100/70/800A3X/... Example (MF3 mounting): CGH3MF3/100/70/800A3X/B11CADMW CG = Double rod cylinder H3 = Series [Mounting] = MF3, MT4, or MS2 (to be specified) 100 = Piston diameter (mm) 70 = Piston rod diameter (mm) 800 = Stroke length (mm) A = Design principle (head and base flanged) 3X = Component series For MT4 mounting, the "XV" dimension (trunnion position) must be specified in plain text on the order .
- 格式
- Other、Parasolid、Rendering
- 分类
- Components、Industrial design、Machine design
- 标签
- boschrexroth、rexroth、hydrauliccylinder、milltypecylinder、doublerodcylinder、cgh3、industrialhydraulics、hydraulics、fluidpower、motioncontrol、heavydutycylinder、milltype、din24333、iso6022、heavyequipment、machinebuilding、industrialmac
- 数据更新
- 2026-11-09T18:33:53Z
