GrabCAD 模型信息
Mobile Hydraulic Oil Filtration Unit · 模型 49345
Overview Advanced Technology: The Mobile Hydraulic Oil Filtration Unit is an integrated, mobile system for on-site purification and regeneration of hydraulic oils, designed to maintain hydraulic oil cleanliness and increase equipment life in industrial, construction, and agricultural applications. This unit is a comprehensive solution for maintaining hydraulic systems without the need for lengthy downtime. Filtration specifications: Filtration grade: 1, 3, 6, 10, 25 microns (changeable) Filtration efficiency: βₓ ≥ 200 according to ISO 16889 Number of filtration stages: 2-3 stages Retention capacity: 500 g - 5 kg depending on model Filter status indicator: visual and/or electronic Main components of the unit: 1. Pumping and circulation system: Hydraulic pump: Type: External gear pump, corrosion resistant Material: Cast iron with steel gears Capacity: 20-100 liters/minute depending on model Pressure: Up to 10 bar Electric motor: three-phase or single-phase Protection: IP55 with fan cooling system Drive motor: Power: 1.5-7.5 kW Voltage: 220/380 V, 50/60 Hz Speed: 1450-2900 rpm Protection rating: IP55/IP56 Energy efficiency: IE3/IE4 2. Multi-stage filtration system: Pre-filter: Filtration rating: 25 microns Capacity: Captures large particles Material: Glass or paper fiber Clogging indicator: Mechanical Main filter: Filtration degree: 1-10 microns (customizable) Design: Microporous filters Efficiency: β₁₀ ≥ 200 Capacity: 200-2000 grams Water Absorbing Filter: Technology: Hydrophobic fibers Capacity: Absorbs up to 1% water Saturation indicator: Color change Replacement: When saturated 3. Smart Oil Tank: Structural design: Capacity: 100-500 liters Material: ST37 steel with epoxy coating Design: Rectangular with slanted sides Level indicator: Visual with gauge Filling port: With 10-micron breather filter Tank features: Internal divider: to separate clean oil from dirty oil Drain valve: at the bottom for complete emptying Inspection ladder: for samples and measurements Magnetic separators: to trap metal particles 4. Control and monitoring system: Control panel: On/off switch: with overload protection Indicators: pressure, flow, oil level Operating hours counter: digital Speed regulator: variable for the pump Interface: IP65 weatherproof Sensors: Pressure sensor: 0-10 bar, accuracy ±0.5% Flow sensor: 0-100 l/min Level sensor: Continuous with alarms Temperature sensor: 0-100°C Humidity sensor: for water detection
- 格式
- SOLIDWORKS
- 分类
- Construction、Energy and Power、Marine
- 标签
- 未标注
- 数据更新
- 2026-09-10T12:14:18Z
