Muesli Bar Mould 模型预览

GrabCAD 模型信息

Muesli Bar Mould · 模型 339879

作者:Daniel Soussi

Here is a tool to help make muesli bars or similar. The printed pieces clip together to make a 3 by 4 matrix of 12 spots for your muesli bar filling. See included photos. To complete the mould, print 5 pieces of the short strip and 4 pieces of the long strip. Fit strips together to form a 3 by 4 matrix of cells. For my 3D printer, the long strips are very long, but managed to print the long strips when I placed them as a diagonal on the printing bed. Each mould spot is 16mm deep and 65 by 43mm is size. Once assembled, spoon in and pat down your muesli bar filling in the empty slots. Remove the slots before cooking the muesli bars by disassembling the frame, piece by piece. It should come apart easily. Washing instructions: - Wash in warm soapy water. - Do not immerse in very hot water or place strips in a dish washer. The high temperatures will cause the plastic strips to permanently warp. My print is made in PETG 1.75mm 3DFillies blue filament, with 0.2mm layer height on a PRUSA I3 MK3S printer. I chose a 100% infill density. I hope you can find this print useful, too.

格式
Rendering、STL
分类
3D printing、Household
标签
muesli、bar、mold、mould、kitchen
数据更新
2026-11-09T05:28:13Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。