Multi-link circular expansion mechanism/多连杆圆周扩张机构 模型预览

GrabCAD 模型信息

Multi-link circular expansion mechanism/多连杆圆周扩张机构 · 模型 263962

作者:Wu Changdian

Note that this mechanical mechanism has reference parts. If there is infringement, please contact to delete 1. This mechanism is a multi-link circular expansion mechanism, which is driven by SEW servo electric reducer. It is not a cylinder. 2. The reduction ratio of the servo reducer is 1:300. The time required for the expansion mechanism to open is 3~5s. 3. The linear movement distance of the expansion mechanism servo drive is 150 mm. 4. The expansion mechanism is suitable for circular hole objects with an internal diameter of 180 mm~570 mm. 5. The maximum diameter of the expansion mechanism is about 3 times of the minimum diameter, and has good expansion ability. 6 The expansion mechanism driven by servo is easier to control than that driven by cylinder 注意,此机械机构有借鉴部分,如有侵权请联系删除 1、此机构为多连杆圆周扩张机构,是以sew伺服电减速机驱动的,非气缸 2、伺服减速机减速比为1:300,扩张机构张开所需时间为3~5s 3、扩张机构伺服驱动的直线移动距离为150mm 4、扩张机构适用于内径为180mm~570mm直径的圆孔物体 5、扩张机构最大直径为最小直径的3倍左右,具有较好的扩张能力 6、伺服驱动的扩张机构较气缸驱动更容易控制

格式
STEP / IGES
分类
Hobby、Industrial design、Robotics
标签
multi-link circular expansion mechanism
数据更新
2026-10-28T13:32:18Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。