GrabCAD 模型信息
NASA CHAMP CLAMP (Strong man) · 模型 336606
***NEW VIDEO 3-13-2015 https://www.youtube.com/watch?v=8YXGA_bC_hM&feature=youtu.be static load test of 226 lbs!!! CONFIRMED! (3:20) testing the lever (5:36) static load test of 250LBS!! UNOFFICIAL, critical failure (11:30) damage assessment (13:20) ** 2-18-2015 I'm considering this design finished for now, I've uploaded all the files. In summary, the design intent behind this clamp design was to have something SIMPLE, STRONG and ROBUST and to explore a means to increase the holding force of the clamp. I didn't want to use a screw thread to apply torque as I wanted something that could be quickly clamped on and off. I also wanted to exploit the fact that you can use infill with the 3DP process to keep the overall weight down, but still have descent structural integrity. It's a beefy design yes, but that doesn't mean it weighs a lot, only 89grams. ***A note on support material. Since the ISS printer can't handle support material, this design uses a VERY small amount of support material INTEGRATED IN THE DESIGN ITSELF so there's no need to generate support material. The support material is easily removed by hand, not tools are required. As for the Aesthetics, knowing the end purpose of the clamp was for the space industry, I wanted to keep the surface simple and clean, free of logos and unneeded pocketing where dust and bacteria can collect. Also, the need for pocketing wasn't necessary as you can adjust the weight through infill with 3DP. All the models I printed and tested used only 30% infill!!!! With this particular design, I was able to hold a static load of 150lbs, with room to spare. I respected the rules on radiused edges and tried to apply them as closely as possible to this specific model. Anyway, I feel I was very successful in achieving this goal with this design, and I learned a lot in the process, like how to orient 3DP parts for maximum strength, due to weaker layer bonds from the 3DP process. I tested the clamp using a 150lbs static weight running perpendicular to the rail without failure, I estimate I could have increased it to over 160-170lbs. I tested with 78lbs static weight running along the handrail before the my test rig started to slip, the clamp held in place. The video's of these specific load testing experiments are posted below. The main file to print is: NASA_CHAMP_strongman_3DPR_STL This file has only been oriented for printing with slic3r/Pronterface software, it HAS NOT ...
- 格式
- SOLIDWORKS 2012、STL、Rendering
- 分类
- 3D printing、Aerospace、Industrial design
- 标签
- handrailclamp
- 数据更新
- 2026-11-09T05:46:50Z