GrabCAD 模型信息
Olympus OM Shoe 4 · 模型 41557
Four parts that can be 3D printed for replacing the original, often broken, phenolic parts on the hot shoe used on Olympus OM1-n and OM2-n cameras. This step file (in inches) may be useful or a starting point for other variations of the OM series removable hot shoes. The STL files (in mm) should allow you to directly print working parts for the Shoe 4 variation. The recess around the center and TTL pins did not print well so I made a separate part call TTL-Interface that just sits in, no need to glue. Note that some sanding may be required depending on the accuracy you get from your printer. You will also need some sort of super glue like JB Weld or Sugru, etc. to glue in the side/cushion wings. Silicon 5x2x1.5 mm o-rings are used for cushioning the interface to the body and can be found on Amazon. If the 3D print edges are crisp enough, the o-rings will snap in and stay.
- 格式
- STL、STEP / IGES
- 分类
- 3D printing、Hobby、Just for fun
- 标签
- shoe 4、om2-n、om1-n、olympus
- 数据更新
- 2026-10-09T11:44:41Z
