GrabCAD 模型信息
OpenRC TRuggy HSPr · 模型 256098
This is a remix of the OpenRC Truggy by Daniel Noree. It uses driveline parts (differentials, motor plate, center gear, dogbones, etc) from HSP RC cars. These parts are inexpensive and available on Amazon and AliExpress. Some of the printed parts are the same as the original Truggy, but most are tweaked to accommodate the HSP components. In addition to the standard components required by the Truggy, You will need to order these HSP parts: HSP#, QTY, Description, (Notes) 02024, 2, Differential 02030, 1, Front pinion and shaft, (Comes with C clip to hold pinion gear on) 03015, 1, Rear pinion and shaft 03007, 1, motor plate 04003, 1, center drive shaft 11184, 1, Main Gear, (64T) 11181, 1, Motor Gear, (11119 is 17T, 11181 is 21T) 02016, 2, Drive Cup 02033, 4, Axle Stub 12007, 4, 100mm dog bone, (Goes by brand HSP or RedCat) These parts are also needed for the build. You can order these HSP parts, but you may choose to buy other equivalent parts: HSP#, QTY, Description, (Notes) 02055, 4, Nylon Lock Nut M4, (For the wheels. Get the crappy looking black ones, they hold better than the pretty anodized ones) 02038, 13, Ball Head Screw 6mm 02138, 8, Bearing 15x10x4mm, (Sold in packs of 6, one on each wheel, two in each diff) 02139, 9, Bearing 10x5x4mm, (Sold in packs of 2 or 8, one on each wheel, two in each diff, one on the motor plate) 08027, 5, Pin 2x10mm, (one in each wheel and one for the main gear) 06002, 4, Spring and Shock Absorber, (also goes by number 106004) 02053, 4, Body clips 08010N, 4, Wheel and Tire, (Sold in packs of 2, Only buy this if you don't want to print the wheels) Standard Truggy Parts: QTY, Description, (Notes) 4, Bearing 12x6x4mm (for the Steering. Search for "bearing 12x6x4") 4, Inner Wishbone Pin 3x56mm, (cut from a 300mm rod, search for "3mm x 300mm rod" ) 4, Outer Wishbone Pin 3x31mm, (also cut from a 300mm rod) Other stuff U need: Radio and receiver (I like the Flysky FS-GT2) Steering Servo (Search for "standard servo") 540 size Motor and ESC (Search for "brushless 540 motor and esc") 2S Lipo battery (Search for "Turnigy 2200mAh 2S 20C Lipo Pack") Charger (Search for "2S LiPo Charger") RC Sticky tape (Search for "Double Sided Clear Servo Tape") Body (I rock an HSP body (of course lol). Search for "hsp 94111 body") Some tools you should buy! Park tool: HSP 80132 Little wrenches: https://www.amazon.com/Zenith-Industries-ZN502010-Double-5mm-11mm/dp/B00HVLELSI/ref=sr_1_8?crid=2TU6IPE6KY3D7&keywords=5.5mm+wrench&qid=1572669573&s...
- 格式
- STEP / IGES、Rendering、Other
- 分类
- 3D printing、Hobby、Toys
- 标签
- rc、hsp、truggy、openrc
- 数据更新
- 2026-11-02T18:23:41Z