GrabCAD 模型信息
Outdoor Weather Station. Modified Stevenson screen. · 模型 147287
Outdoor Weather Station I believe the concept should be familiar — as similar as possible to the airrohr-firmware-flasher, for example. Outdoor weather station inside a Stevenson screen, based on the ESP32-S3-WROOM-1-N16R8 controller. Logs are stored in memory and transmitted to the home station. Missing or additional data (for the user only) is retrieved from the internet. The station is equipped with the following sensors: • GXHT30 (with protective sticker) • LTR390 (with loss compensation factor) • ZMOD4510 (sensitive even to silicone) • Sensirion SPS30 (air intake and exhaust through the bottom) — connected via TXS0108. See connection diagram. Upon controller boot, a web server with configuration settings is created. Network name: station name + controller chip serial number. Connection via Wi-Fi. Login/Password: admin/admin. Settings: • Input of device installation coordinates (format: 55.752792, 37.622675). • From the coordinates (1) (using internet access), the altitude above sea level can be determined. • Additional (2) height from the ground surface to the installation point. These two parameters are summed. • Optional input of the operational altitude of the device relative to sea level (e.g., for a coast near zero elevation or a mountain village at +1000 m above sea level). This is a crucial parameter for converting absolute pressure to relative pressure (reduced to sea level), allowing calculations that match weather forecasts. • Input of UV and temperature correction values. Using redundant data from the internet and the program’s own algorithms, the system periodically diagnoses sensor health and degradation. Data received by the user: • Approximate time • Illuminance index • UV radiation index • Winter smog index • Summer smog index • Particulate matter index • Current humidity • Absolute humidity (actual moisture content independent of temperature) • Current temperature • Heat index: “Feels like” calculation for summer • Wind chill index: for winter calculations (anemometer data from the internet) • Current pressure • Dew point • Frost probability When a “home device” is detected, data is transmitted to it. That is a second, less rugged but more functional device — not discussed here. No firmware flashing software is provided here. This is a hobby.
- 格式
- AutoCAD、SOLIDWORKS、STEP / IGES、Rendering、Text file、Other
- 分类
- Hobby
- 标签
- stevenson、weather
- 数据更新
- 2026-10-20T19:50:43Z
