GrabCAD 模型信息
PEEP valve · 模型 294871
PEEP = Positive End-expiratory Pressure Valve This is an experimental, highly configurable PEEP valve design (for 22mm tube systems), which can utilize a spring or a rubber band to maintain the opening pressure level. PEEP valves are used in ventilation systems, to maintain ~20cmH2O pressure in the hood. The initiative for the design came from a FB discussion on chances to 3D print a PEEP valve to non-invasive ventilation systems - to increase the capacity in case a commercial valve is not available on the market due to the COVID19 situation. The original idea - to use a ping-pong ball as a valve coming from James Rink (surgeon in the UK), and this is a solution proposal from my side to his idea. The design - by intention, built only on standard components, like a flat-seal from garden pipe system, a ping-pong ball, rubber band, standard springs. Most parameters can be configured, like ball diameter, ball clearance, thread clearance, thread pitch, connecting tube parameters, spring parameters, etc... There are two variants: with or without seal ring, and it can be printed without support. The design was quickly checked on an anesthetic circuit with positive results.
- 格式
- Rendering、STEP / IGES
- 分类
- Medical
- 标签
- 未标注
- 数据更新
- 2026-10-24T09:17:12Z
