GrabCAD 模型信息
Phanteks Evolv Shift XT Noctua Mods V2.0 · 模型 282144
Updated model to V2.1 - See notes below. Thermal management is a well known issue for SFF builds. To mitigate the possibility of thermal throttling I opted for a custom EK water cooled loop. The problem was that this case layout is badly optimized for airflow and only supports 120mm fans on top the 240mm radiator. Theory Behind The Problem: The restrictive ventilation is unable to vent hot air reasonable time. Stagnant or slow moving air in the top of the case transfers most heat to AL case panels which act as heatsinks, thus causing a thermal feedback loop. This happens because AL panel has insufficient area to allow for passive heat convection to work effectively. Design Overview: The modification involves adding a rear exhaust area and a fan cowling to support high static pressure Noctua NF-14 fans with a 25x240mm radiator. All parts are optimized for 3D printing and require no modification to the case. Model has added clearances for 30x240mm radiators for more heat dissipation capacity (RTX 4090 + AMD EPYC). The Secret Sauce: To mitigate the heatsink effect caused by AL panels and stagnant air pockets, foam seals are added between the fan cowling and AL panel housing. High static pressure fans force air to be exhausted to the top and rear areas. Water is more effective at conducting heat than air, thus fan speeds need to be tuned in conjunction to the pump curves. Results: The system can maintain around 50-60deg stable temperature under full synthetic load with a R9-7900X and RTX 4080 FE GREAT SUCCESS! Perhaps I will do some empirical validation of test pump curves etc. in the future - lets see! Thanks to creators for reference models used in this build: - Build Reference: GGF Events - https://youtu.be/Aoc1pBWdrRo - RTX4090 Model: https://grabcad.com/library/nvidia-rtx-4090-fe-stp-1 - Motherboard: https://grabcad.com/library/asus-rog-strix-x570-i-mini-itx-gaming-mainbord-1 - SFX PSU: Uhttps://grabcad.com/library/gene Update Log 2023.02.18: Added custom GPU mounting brackets, reworked tubing positions, Updated GPU block with a *badly designed channel plate. 2023.01.07: Updated the case design, added component layout and plumbing components.
- 格式
- SOLIDWORKS、Rendering、STEP / IGES
- 分类
- 3D printing、Computer、Tech
- 标签
- hobby、amd、phanteks、gaming、water cooling、ekwb、ek
- 数据更新
- 2026-11-03T16:53:32Z