Pillow block ball bearing unit with narrow inner ring and eccentric locking collar, North American standards ( P2BL 010-RM). 模型预览

GrabCAD 模型信息

Pillow block ball bearing unit with narrow inner ring and eccentric locking collar, North American standards ( P2BL 010-RM). · 模型 356389

作者:Gorilla Auto-Academy

P2BL 010-RM Pillow block ball bearing unit with narrow inner ring and set screw locking, North American standards Pillow (plummer) block ball bearing units consist of an insert bearing mounted in a cast iron housing that can be bolted to a support surface. This variant is suitable for applications where the direction of rotation is constant or alternating. It has a narrow inner ring extended on one side and is locked onto the shaft by tightening two set screws on the inner ring, making it easy to mount. The units are compliant with North American standards. Low centre height Ready to mount Lubricated and sealed bearing Quick locking onto the shaft Narrow inner ring for tight operating spaces The P2BL 010-RM is a pillow block ball bearing unit from SKF, featuring a narrow inner ring and set screw locking, manufactured to North American standards . It is designed for supporting rotating shafts in light- to medium-duty industrial applications, particularly where installation space is limited and quick, secure shaft mounting is required. The unit features a low base-to-center height (P2BL series), which is typically 1/16" lower than the standard P2B series, making it suitable for compact machinery layouts . The narrow inner ring design is specifically intended for tight operating spaces where a wide inner ring would not fit, while still providing reliable shaft support . The set screw locking mechanism uses two set screws positioned 120° apart on the inner ring, maximizing holding power while minimizing inner ring distortion; this variant is suitable for applications where the direction of rotation is constant or alternating . The housing is made of cast iron for strength and stability, and the unit is supplied pre-lubricated with a high-quality grease and equipped with a grease fitting for relubrication . Contact seals on both sides help exclude dust, moisture, and contaminants, extending service life . Key specifications for the 010 size include: 5/8 inch (15.875 mm) bore diameter, 1-1/16 inch (26.99 mm) base-to-bore centerline, 3-1/8 to 4-1/8 inch bolt hole spacing, and a 2-bolt base mounting configuration . The dynamic load capacity is approximately 9.56 kN and the limiting speed is 9,500 r/min .

格式
STEP / IGES、Rendering、Other
分类
Automotive、Components、Machine design
标签
pillowblockbearing、ballbearingunit、p2bl010rm、narrowinnerring、setscrewlocking、northamericanstandards、mountedbearings、bearinghousings、castironhousing、skf、machinedesign、industrialautomation、maintenance、engineeringcomponents、manufacturing
数据更新
2026-11-15T19:33:13Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。