Pilot-operated, balanced piston relief valve 模型预览

GrabCAD 模型信息

Pilot-operated, balanced piston relief valve · 模型 123862

作者:Gorilla Auto-Academy

Pilot-operated, balanced-piston relief cartridges are normally closed pressure regulating valves. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to regulate the pressure. These valves are accurate, have low pressure rise vs. flow, they are smooth and quiet, and are moderately fast. All 2-port relief cartridges (except pilot reliefs) are physically and functionally interchangeable (same flow path, same cavity for a given frame size). Will accept maximum pressure at port 2; suitable for use in cross port relief circuits. If used in cross port relief circuits, consider spool leakage. Main stage orifice is protected by a 150-micron stainless steel screen. Not suitable for use in load holding applications due to spool leakage. Back pressure on the tank port (port 2) is directly additive to the valve setting at a 1:1 ratio. Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals. W and Y controls (where applicable) can be specified with or without a special setting. When no special setting is specified, the valve is adjustable throughout its full range using the W or Y control. When a special setting is specified, this setting represents the maximum setting of the valve. Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP for external stainless steel components, or /LH for external zinc-nickel plated components. See the CONFIGURATION section for all options. For further details, please see the Materials of Construction page located under TECH RESOURCES. Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

格式
STEP / IGES、Rendering、Other
分类
Components、Electrical、Robotics
标签
directactingfaster、nobinding、floatingstyle、hydrauliccartridge、mediumresponse、lowhysteresis、lowpressureoverride、pressureregulating、normallyclosed、sunhydraulics、hydraulicvalve、pressurecontrol、reliefvalve、balancedpiston、pilotoperated
数据更新
2026-10-13T04:29:31Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。