GrabCAD 模型信息
Plate · 模型 404430
First, I create the biggest circle to 980mm and created the smaller circle to 200mm. Next, I created a circle towards the top at 60 for the radius and 10 on the other side of the center line. Then, I created the 2 lines and smart dimensioned them to be 40mm apart. Next, I used the circular sketch pattern to create the rest of the spokes. Then, I extruded the center piece to 85mm and the spokes to 30mm. Next, I extruded the rest of my drawing to 55mm. Afterwards, I went to the front plane and went to the side of it and sketched out the dimensions shown on the blue print. I also revolve cut around the vertical centerline to cut the corner off, as shown. Finally, I changed the material to 1060 alloy and checked my mass.
- 格式
- Rendering、SOLIDWORKS
- 分类
- Industrial design、Machine design、Tech
- 标签
- stc_cad_p
- 数据更新
- 2026-10-23T20:49:39Z