Pneumatic equipment - Valves - Three Or Above Ports Valve -  3V2M Series (3/2 Way) - (3V2M - Solid valve) - 3V2MNCA - Valve Only. 模型预览

GrabCAD 模型信息

Pneumatic equipment - Valves - Three Or Above Ports Valve - 3V2M Series (3/2 Way) - (3V2M - Solid valve) - 3V2MNCA - Valve Only. · 模型 396892

作者:Gorilla Auto-Academy

AirTAC 3V2MNCA Pneumatic Solenoid Valve (3V2M Series, 3/2 Way, Valve Only) The AirTAC 3V2MNCA is a 3/2-way, normally closed (NC), direct-acting solenoid valve from the 3V2M series, supplied as the valve body only (without manifold base). The model code decodes as: 3V2M (3/2-way manifold-type valve), NC (normally closed), A (AC220V standard voltage). The "Valve Only" designation means the manifold sub-base, seals, and mounting screws are not included and must be ordered separately or are already available on site. Core Specifications: The valve features a PT1/8 port size with effective cross-sectional area of 1.7 mm² (Cv = 0.1). Operating pressure range is 0–0.8 MPa (0–114 psi), with guaranteed proof pressure of 1.2 MPa. The valve operates on filtered air (40 μm or finer) and requires no oil lubrication. The coaxial blanking structure ensures tight sealing and large air flow. Electrical & Environmental Characteristics: Standard voltage for this configuration is AC220V. Power consumption is approximately 7 VA (AC). Protection rating is IP65 (DIN 40050), with an ambient temperature range of -20°C to 70°C. The body is constructed from aluminum alloy. Response time is 0.05 seconds or less, with a maximum operating frequency of 10 cycles per second. Key Features: 3/2-way, normally closed, direct-acting solenoid valve PT1/8 port size, Cv = 0.1 Operating pressure: 0–0.8 MPa Coaxial blanking structure for leak-proof, high-flow performance No lubrication required Manual override device equipped for easy installation and debugging Valve only — manifold base is NOT included and must be sourced separately Designed for use with 3V2M series sub-base, allowing flexible combination and expansion Important Note on "Valve Only": This configuration is the solenoid valve body alone. The 3V2M series valve must be used in conjunction with a manifold sub-base (ordered separately) to function as a complete unit. The sub-base provides the pneumatic connections, unified intake/exhaust, and mounting interface. If you need a ready-to-install unit, you would need to order the valve together with a compatible 3V2M manifold base (e.g., 1F, 2F, etc.). Typical Applications: Single-acting cylinder control, air blow-off circuits, clamping systems, and manifold-based pneumatic control panels. The "valve only" format is ideal for maintenance replacements, spare parts inventory, or system builds where manifold bases are already specified and stocked separately.

格式
STEP / IGES、Rendering、Other
分类
Components、Electrical、Robotics
标签
pneumatics、3v2m、3v2mnca、3wayvalve、airtac、pneumaticsolenoidvalve、solenoidvalve、normallyclosed、directacting、valveonly、manifoldvalve、manualoverride、aluminumalloy、compressedair、pneumaticcontrol、engineeringspecs、cv01、spareparts
数据更新
2026-11-19T03:04:34Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。