GrabCAD 模型信息
Power Cord Lift Mechanism for Sliding Table · 模型 155858
The table used for the rice cooker in our home has a sliding shelf that can be pushed to the back when not in use and pulled forward when needed. The power outlet is located at the very back of the shelf. The power cord of the rice cooker is long enough, so it doesn't fall short even when the table is pulled out. However, because of its length, it hangs down behind the sliding table and gets stuck between the table and the wall behind it, preventing the table from being pushed all the way back. If the power cord doesn't hang down, the table can be pushed all the way back. So, I created a mechanism to hold up the cord. The table moves 405mm back and forth, so I had to come up with a mechanism to lift the cord within that stroke, considering the size that can be made with a 3D printer (maximum 200mm). It took some time to complete due to these challenges. In addition to the parts printed with a 3D printer, you will need the following items: * MF633ZZ 3x6x2.5mm Flange Ball Bearings (2 pieces) * M3x16mm Screws * M3 Flat Washers * M3 Nuts * Rubber Bands (to act as springs) * Double-Sided Tape (to attach parts to the table) That's all.
- 格式
- FreeCAD、STL、Rendering
- 分类
- 3D printing、Household、Just for fun
- 标签
- sliding shelf cable、cord holder、cord hoisting system、cord lift mechanism
- 数据更新
- 2026-09-21T17:17:20Z
