GrabCAD 模型信息
Project Mehr| Parametric Guitar V3 · 模型 117280
Hey everyone, My Mehr design is now fully parametric and available to the public. There have been hundreds of versions of this guitar over the last few years each time I wanted to make small changes. However I finally sunk the time to make it parametric. The model isn't 100% stable, you can still break the sketches/features if you push the parameters too far, however if you take it easy and make changes in small increments it should work for almost any spec. _________________________________________ NOTE: I did NOT include any pickup slots, control cavity, or hardware. This is because I expect that most people will want to use their own pickups and harwdare - so use this as your starting point, then create those features based on your hardware of choice. WARNING: Please pay attention to the comments I included in the parameters menu. They give important instructions to keep the sketches and features stable while making changes. _________________________________________ Paramters list: String Count String Spacing at the nut String Spacing at the bridge Edge gap between outside strings and edge of fretboard. Low side scale length High side scale length Which fret is vertical when using multiscale configurations Fret count Radius of the fretboard at the nut end of the fretboard. Radius of the fretboard at the heel end of the fretboard. Thickness of the fretboard at the nut. Offset to switch between blind and through fret slots. Primary headstock angle. Width of the shelf space for the nut. To see how I modeled this guitar, check out my youtube channel. https://www.youtube.com/austinshaner The parametric fretboard template used in this design can be found here: https://grabcad.com/library/parametric-fretboard-v3-1
- 格式
- Fusion 360、Rendering
- 分类
- Educational、Hobby、Miscellaneous
- 标签
- parametric、fusion360、guitar
- 数据更新
- 2026-10-11T20:40:12Z
