GrabCAD 模型信息
RadioMaster Bandit BR1 ExpressLRS Receiver · 模型 380264
Mechanical reference model of the RadioMaster Bandit BR1 for FPV frame, enclosure and mount design. Bare receiver and a separate assembly with one 915 MHz T-antenna. Named, coloured components are retained in STEP. Units are millimetres. PCB marking BanditBR1 V1.0. The bare model is approximately 18 by 14 by 3 mm. Manufacturer references disagree on the overall height; board and component heights remain estimates. External antenna connectors use matching I-PEX MHF I manufacturer geometry where fitted. Antenna cable routing is a modelled mounting pose and can be repositioned for integration. Reconstructed from RadioMaster product documentation, revision-matched photographs, component datasheets and supplied antenna CAD. Numerically checked for valid solids, unintended intersections and STEP round-trip consistency, then visually compared with the source references. This is an independently reconstructed mechanical reference, not an official manufacturing model. Hidden details, solder joints and small electronics are simplified. Check the actual hardware before manufacturing a tight-fitting mount.
- 格式
- STEP / IGES、Rendering
- 分类
- Aviation、Electrical
- 标签
- radiomaster、br1、expresslrs、elrs、receiver、fpv、drone、antenna、step
- 数据更新
- 2026-11-17T09:33:56Z