RadioMaster Bandit BR3 ExpressLRS Receiver 模型预览

GrabCAD 模型信息

RadioMaster Bandit BR3 ExpressLRS Receiver · 模型 380263

作者:Nils

Mechanical reference model of the RadioMaster Bandit BR3 for FPV frame, enclosure and mount design. Bare receiver and a separate assembly with two 915 MHz T-antennas. Named, coloured components are retained in STEP. Units are millimetres. The bare model is approximately 24 by 14 by 4 mm. Manufacturer references disagree on the overall height; board and component heights remain estimates. External antenna connectors use matching I-PEX MHF I manufacturer geometry where fitted. Antenna cable routing is a modelled mounting pose and can be repositioned for integration. Reconstructed from RadioMaster product documentation, revision-matched photographs, component datasheets and supplied antenna CAD. Numerically checked for valid solids, unintended intersections and STEP round-trip consistency, then visually compared with the source references. This is an independently reconstructed mechanical reference, not an official manufacturing model. Hidden details, solder joints and small electronics are simplified. Check the actual hardware before manufacturing a tight-fitting mount.

格式
STEP / IGES、Rendering
分类
Aviation、Electrical
标签
radiomaster、br3、expresslrs、elrs、receiver、fpv、drone、antenna、step
数据更新
2026-11-17T09:33:02Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。