RadioMaster Receiver T-Antennas - V2 2.4 GHz, Dual Band and 915 MHz 模型预览

GrabCAD 模型信息

RadioMaster Receiver T-Antennas - V2 2.4 GHz, Dual Band and 915 MHz · 模型 380262

作者:Nils

Mechanical reference models of RadioMaster receiver T-antennas for FPV antenna mounting and clearance checks. Three standalone coloured T-antenna assemblies with coax cables and I-PEX plugs. Named, coloured components are retained in STEP. Units are millimetres. The complete V2 2.4 GHz antenna reuses the original supplied CAD. The dual-band antenna reuses the existing seven-part construction. The 915 MHz version derives from the same centre and long radiator geometry, without the small upper element. Radiator spans are approximately 52 mm for V2 and 150 mm for the other two. Cable lengths and poses represent the documented model configurations, not every retail cable option. External antenna connectors use matching I-PEX MHF I manufacturer geometry where fitted. Antenna cable routing is a modelled mounting pose and can be repositioned for integration. Reconstructed from RadioMaster product documentation, revision-matched photographs, component datasheets and supplied antenna CAD. Numerically checked for valid solids, unintended intersections and STEP round-trip consistency, then visually compared with the source references. This is an independently reconstructed mechanical reference, not an official manufacturing model. Hidden details, solder joints and small electronics are simplified. Check the actual hardware before manufacturing a tight-fitting mount.

格式
STEP / IGES、Rendering
分类
Aviation、Electrical
标签
radiomaster、receiverantennas、expresslrs、elrs、receiver、fpv、drone、antenna、step
数据更新
2026-11-17T09:32:08Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。