GrabCAD 模型信息
RadioMaster RP2 V2 ExpressLRS Receiver · 模型 380260
Mechanical reference model of the RadioMaster RP2 V2 for FPV frame, enclosure and mount design. One populated receiver assembly including its integrated tower antenna. Named, coloured components are retained in STEP. Units are millimetres. PCB revision V1.2. The model is approximately 13 by 11 by 6 mm. Its reconstructed height remains below the manufacturer overall height of 7 mm; the height reference and tower geometry are unresolved estimates. Central exposed package contacts are included. External antenna connectors use matching I-PEX MHF I manufacturer geometry where fitted. Antenna cable routing is a modelled mounting pose and can be repositioned for integration. Reconstructed from RadioMaster product documentation, revision-matched photographs, component datasheets and supplied antenna CAD. Numerically checked for valid solids, unintended intersections and STEP round-trip consistency, then visually compared with the source references. This is an independently reconstructed mechanical reference, not an official manufacturing model. Hidden details, solder joints and small electronics are simplified. Check the actual hardware before manufacturing a tight-fitting mount.
- 格式
- STEP / IGES、Rendering
- 分类
- Aviation、Electrical
- 标签
- radiomaster、rp2v2、expresslrs、elrs、receiver、fpv、drone、antenna、step
- 数据更新
- 2026-11-17T13:13:42Z