RadioMaster RP3-H ExpressLRS Receiver 模型预览

GrabCAD 模型信息

RadioMaster RP3-H ExpressLRS Receiver · 模型 380258

作者:Nils

Mechanical reference model of the RadioMaster RP3-H for FPV frame, enclosure and mount design. Three assemblies: housed receiver, housed receiver with two long wire antennas, and the populated PCB alone. Named, coloured components are retained in STEP. Units are millimetres. The enclosure is 28 by 24 by 8 mm. The internal board dimensions, concealed enclosure details, port geometry and wire antenna active ends are reconstructed estimates. Cable bends represent one assembly pose. External antenna connectors use matching I-PEX MHF I manufacturer geometry where fitted. Antenna cable routing is a modelled mounting pose and can be repositioned for integration. Reconstructed from RadioMaster product documentation, revision-matched photographs, component datasheets and supplied antenna CAD. Numerically checked for valid solids, unintended intersections and STEP round-trip consistency, then visually compared with the source references. This is an independently reconstructed mechanical reference, not an official manufacturing model. Hidden details, solder joints and small electronics are simplified. Check the actual hardware before manufacturing a tight-fitting mount.

格式
Rendering、STEP / IGES
分类
Aviation、Electrical
标签
radiomaster、rp3h、expresslrs、elrs、receiver、fpv、drone、antenna、step
数据更新
2026-11-17T09:28:12Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。