GrabCAD 模型信息
RadioMaster RP4TD-M ExpressLRS Receiver · 模型 380256
Mechanical reference model of the RadioMaster RP4TD-M for FPV frame, enclosure and mount design. Bare receiver and a separate assembly with two complete original V2 2.4 GHz T-antennas. Named, coloured components are retained in STEP. Units are millimetres. PCB marking RP4M V1.2. The bare model is approximately 18 by 16 by 4 mm. The PICO-D4 package substrate is included. The manufacturer drawing height of 2 mm has an unresolved datum and was not used to compress the assembly. External antenna connectors use matching I-PEX MHF I manufacturer geometry where fitted. Antenna cable routing is a modelled mounting pose and can be repositioned for integration. Reconstructed from RadioMaster product documentation, revision-matched photographs, component datasheets and supplied antenna CAD. Numerically checked for valid solids, unintended intersections and STEP round-trip consistency, then visually compared with the source references. This is an independently reconstructed mechanical reference, not an official manufacturing model. Hidden details, solder joints and small electronics are simplified. Check the actual hardware before manufacturing a tight-fitting mount.
- 格式
- STEP / IGES、Rendering
- 分类
- Aviation、Electrical
- 标签
- radiomaster、rp4tdm、expresslrs、elrs、receiver、fpv、drone、antenna、step
- 数据更新
- 2026-11-17T09:26:24Z