RadioMaster XR1 Nano ExpressLRS Receiver 模型预览

GrabCAD 模型信息

RadioMaster XR1 Nano ExpressLRS Receiver · 模型 380265

作者:Nils

Mechanical reference model of the RadioMaster XR1 Nano for FPV frame, enclosure and mount design. Bare receiver and three mounted T-antenna configurations: V2 2.4 GHz, 915 MHz and dual band. Named, coloured components are retained in STEP. Units are millimetres. The bare board is approximately 20 by 13 mm. The photo-derived width and component heights are estimates; allow clearance when designing a close-fitting mount. LR1121 height is an estimate within the documented package range. External antenna connectors use matching I-PEX MHF I manufacturer geometry where fitted. Antenna cable routing is a modelled mounting pose and can be repositioned for integration. Reconstructed from RadioMaster product documentation, revision-matched photographs, component datasheets and supplied antenna CAD. Numerically checked for valid solids, unintended intersections and STEP round-trip consistency, then visually compared with the source references. This is an independently reconstructed mechanical reference, not an official manufacturing model. Hidden details, solder joints and small electronics are simplified. Check the actual hardware before manufacturing a tight-fitting mount.

格式
Rendering、STEP / IGES
分类
Aviation、Electrical
标签
radiomaster、expresslrs、elrs、receiver、fpv、drone、antenna、step、xr1nano
数据更新
2026-11-17T18:25:52Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。