GrabCAD 模型信息
RadioMaster XR4 ExpressLRS Receiver · 模型 380253
Mechanical reference model of the RadioMaster XR4 for FPV frame, enclosure and mount design. Bare receiver and a separate assembly with two dual-band T-antennas. Named, coloured components are retained in STEP. Units are millimetres. The bare model is approximately 22 by 18 by 4 mm. The bind switch is entirely inside the board outline; RF package orientation marks were corrected during final review. External antenna connectors use matching I-PEX MHF I manufacturer geometry where fitted. Antenna cable routing is a modelled mounting pose and can be repositioned for integration. Reconstructed from RadioMaster product documentation, revision-matched photographs, component datasheets and supplied antenna CAD. Numerically checked for valid solids, unintended intersections and STEP round-trip consistency, then visually compared with the source references. This is an independently reconstructed mechanical reference, not an official manufacturing model. Hidden details, solder joints and small electronics are simplified. Check the actual hardware before manufacturing a tight-fitting mount.
- 格式
- STEP / IGES、Rendering
- 分类
- Aviation、Electrical
- 标签
- radiomaster、xr4、expresslrs、elrs、receiver、fpv、drone、antenna、step
- 数据更新
- 2026-11-18T02:14:58Z