GrabCAD 模型信息
RC Catamaran Airboat – 3D-printed, ducted prop, air rudders · 模型 418196
A 3D-printed RC catamaran airboat. Propulsion is a ducted propeller with air rudders, and the pontoons have skegs for directional stability. The project is finished: it sails well on a lake and does everything I wanted. I’m sharing it as-is and won’t be developing it further. Specs Assembled weight: ~3 kg Battery: 3S 18650 pack (I used 3S3P; 3S2P should work and saves weight) Motor current: up to ~10 A Pontoons Each pontoon is printed as 2 halves (cut face down) plus a 150 mm insert between them for extra buoyancy. The parts are joined by 2 internal longitudinal aluminum tubes [Ø __ mm] with no glue or fasteners: the frame clamps hold everything together. The clamps are two-part, so you can remove any of them without sliding it along the tube. Hardware M3×10 bolts + M3 nuts (nuts sit in shallow recesses on the outside) Aluminum tubes: [Ø 8mm] Print settings Material: PETG Printer: Ender 5 Plus (300×300 bed). The pontoon halves need a large bed. Notes Tested on a lake. With shorter pontoons (without the inserts) the boat sat too low, which is why the 150 mm inserts exist.
- 格式
- STL、Fusion 360、STEP / IGES
- 分类
- 3D printing、Hobby、Toys
- 标签
- rc、boat、18650、petg、airboat、catamaran、pontoon
- 数据更新
- 2026-11-21T11:11:56Z