Reel Spooler 模型预览

GrabCAD 模型信息

Reel Spooler · 模型 393635

作者:Daniel Soussi

To improve thermal control of my 3D prints on difficult plastics, I moved my Prusa i3 MK3s into an enclosure. The enclosure dimensions was chosen to place the filament reel outside enclosure. I opted for a spooling solution where the filament reel rolls on edge rollers. This design was inspired by the solution by TUSH on Thingiverse https://www.thingiverse.com/thing:2047554 You will need four 608 bearings per reel and four 3mm (5g x 10/12mm) screws. There are also mounting holes underneath to secure the reel spoolers to the top of the enclosure. The original design was press fit into the bearings, but that was not tight enough and would be disasterous if it came apart. My print is made in PETG 1.75mm Aurarum silver filament, with 0.2mm layer height and 100% infill on a PRUSA I3 MK3S printer. I hope you can find this print useful, too. 18/06/2020 Updated. Minor tweak to fill a gap underneath.

格式
Rendering、STL
分类
3D printing、Tech
标签
reel、spooler
数据更新
2026-11-08T19:51:54Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。