Relay Box - Between 850LM and 28V AC Garage Door 模型预览

GrabCAD 模型信息

Relay Box - Between 850LM and 28V AC Garage Door · 模型 317356

作者:Colin Wiens

Personally modeled in SolidWorks, including the screw. 2-part 3D printed box to protect a relay soldered to perf board. The internal space is 30 x 20.5 x 22.5 mm tall. An external relay is used because the relays inside the Liftmaster 850LM have a contact rating of 14V DC. The 850LM manual incorrectly states the contact voltage is 28V AC, but looking up the relay datasheet shows they're rated for switching up to 14V. The contacts only experience 20mA to trigger the door, but I'm choosing to wire it correctly. The 850LM also might not be able to be powered by 28V AC, despite its claims. The first one I bought burnt out in a few minutes and had to be returned. The wiring diagram shows the 12V DC brick I used to power both the 850LM and the external relay. The new relay has a contact rating of 125V, so I used it to trigger the 28V garage door. The 12V supply should be rated 0.1 Amps or more (50 mA receiver + 30 mA relay coil).

格式
SOLIDWORKS、STEP / IGES、STL、Rendering
分类
3D printing、Components、Electrical
标签
case、operator、retro
数据更新
2026-10-24T16:52:35Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。