GrabCAD 模型信息
Rexroth - Bosch Hydraulic Cylinder Tie Rod Design (Single Rod Cylinder - Series CD 70P) Cylinder Internal Diameter = 25 mm , Stroke Length S=200 mm · 模型 126888
For a Rexroth CD70P cylinder with the specifications you requested (25mm bore, 200mm stroke), I found the relevant technical information but also encountered a critical design limitation. 📘 Confirmed Product Information The "P" in the model number designates a specific mounting type . The CD70 series is a tie-rod design with the following key specifications : Parameter Specification Series CD70, Component Series 1X Nominal Pressure 70 bar [7 MPa] Piston Diameter (ØAL) 25 mm Piston Rod Diameter (ØMM) 12 mm to 140 mm (models with 12mm and 16mm rods are common for this bore) Stroke Length 200 mm (as requested) Example Model CD70P 25/16-0060 (25mm bore, 16mm rod, 60mm stroke) ⚠️ Critical Design Constraint The most important technical point is that the 200mm stroke you requested is not permissible for a 25mm bore cylinder. The official Rexroth "admissible stroke lengths" table shows that this cylinder size is not allowed for any stroke length at any operating pressure . The table indicates the minimum bore size that can safely support a 200mm stroke is 32mm . 🔍 Next Steps To safely achieve your required 200mm stroke, you would need to select a larger bore size (e.g., 32mm) .
- 格式
- Other、Parasolid
- 分类
- Components、Energy and Power、Industrial design
- 标签
- industrialhydraulics、hydraulics、rexroth、boschrexroth、re17016、25mmpiston、hydrauliccylinder、tierodcylinder、cd70p、motioncontrol、hydraulicsystems、fluidpower、industrialautomation、mechanicalengineering
- 数据更新
- 2026-09-12T06:51:56Z
