RoboSavvy Humanoid Robot 模型预览

GrabCAD 模型信息

RoboSavvy Humanoid Robot · 模型 333472

作者:Mohomed Nusry

*** Description of RoboSavvy Humanoid Robot V.1.4 *** The robot is based on Bioloid GP, and all the aluminium the structural parts are same as Bioloid GP unless otherwise mentioned here. (Used the reference Bioloid GP model by Limor Schweitzer, found at https://grabcad.com/library/bioloid-gp-1) <b>Some minor changes are made to following structural parts of Bioloid GP.</b> • FR04_E120 • FR04_E120 • Wrist (New aluminium sheet part) • Fingers (New aluminium sheet part for fingers) • Mirror_Wrist (New aluminium sheet part) • Mirror_Fingers (New aluminium sheet part for fingers) <b>AX12</b> One extra AX12 servo is added (other than the existing servos in Bioloid GP) to allow the robot to rotate the chest. This makes the total AX12 count as 17. <b>HXT900 Micro Servos</b> Link: http://www.hobbyking.com/hobbyking/store/__662__HXT900_9g_1_6kg_12sec_Micro_Servo.html The robot consist 5 of these micro servo motors; one for head tilt and two on each hand for wrist rotation and finger grasp. Size: 21 x 12 x 22 mm Voltage: 3v ~ 6v Weight: 11g Speed: 0.12 sec/60 (4.8V) Torque: 2.5 kg cm <b>Battery</b> Link: http://hobbyking.com/hobbyking/store/__24836__Zippy_K_Flightmax_1600mah_3S1P_20C_Lipoly_Battery.html Capacity: 1600mAh Voltage: 3S1P / 3 Cell / 11.1V Discharge: 20C Constant Weight: 125g (including wire, plug & case) Dimensions: 77 x 40 x 27mm <b>Beaglebone Black Embedded Computer</b> Beaglebone Black is selected to be the brain of the robot, over Raspberry Pi; since Beaglebone Black seems to perform well compared to the price difference. (Used the reference Beaglebone Black model found at https://github.com/lgxlogic/BeagleBoneBlack-3D-Model) Also there will be two 3D printed cover pieces to hide and protect the board. The cover pieces are 1mm thick and can be manufactured using 3D printing or vacuum forming. Even the Beaglebone Black is selected here for this robot; still it can accommodate either CM510 controller, Raspberry Pi or any other similar sized embedded computers in the place of Beaglebone without any modifications to the structure or shells of the robot. This is very important when considering further improvements for this open source robot. <b>Camera</b> Hema Pocket Webcam (Used the reference webcam model by Limor Schweitzer, found at https://grabcad.com/library/hema-pocket-webcam-1) <b>Shell</b> All the shell parts are designed as 0.5mm thickness. Only in the head there is a 1mm thick hollow rod ...

格式
SOLIDWORKS、STEP / IGES、Rendering、Other
分类
Machine design、Robotics、Toys
标签
robot、humanoid、robotshell、robosavvy
数据更新
2026-11-11T08:01:15Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。