Robust Involute Spur Gear Generator Solidworks 模型预览

GrabCAD 模型信息

Robust Involute Spur Gear Generator Solidworks · 模型 391463

作者:Robert Conklin

For modeling a TRUE Involute Spur Gear in Solidworks This template is built with some "IF" "THEN" statements So it is a bit more Robust than my previous postings This is with the Gullet of the first tooth cut on the "Y" axis Note: use the updated file: "Robust Involute Spur Gear Generator - Better 02.SLDPRT" Note: this template is set for the User input of the following: "Diametrical Pitch" , "Number of Teeth" & "Pressure Angle" GLOBAL VARIABLES "DiametralPitch"= 25.4 Diametral Pitch “NumTeeth"= 75 Number of Teeth “PressureAngle"= 20deg Pressure Angle “Addendum"= 1 / “DiametralPitch" Addendum “Dedendum"= 1.25 / "DiametralPitch" Dedendum “WorkingDepth"= 2 / "DiametralPitch" Working Depth - here for REF (Not used in building model) “WholeDepth"= 2.25 / "DiametralPitch" Whole Depth - here for REF (Not used in building model) “Clearance"= .19 / "DiametralPitch" Clearance “CircularPitch"= pi / "DiametralPitch" Circular Pitch - here for REF (Not used in building model) “PitchCircle"= "NumTeeth" / "DiametralPitch" Pitch Circle - or - Pitch Diameter “OutsideDiameter"= ( "NumTeeth" + 2 ) / "DiametralPitch" Outside Diameter “Fillet"= "Clearance" * cos ( "PressureAngle" ) * tan ( ( 90 + "PressureAngle" ) / 2 ) Fillet “AddendumCircle"= "PitchCircle" + ( 2 * "Addendum" ) Addendum Circle - or - Addendum Diameter “DedendumCircle"= "PitchCircle" - ( 2 * "Dedendum" ) Dedendum Circle - or - Dedendum Diameter “BaseCircle"= "PitchCircle" * cos ( "PressureAngle" ) Base Circle - Base Diameter “PitchAngle"= 360deg / "NumTeeth" Pitch Angle “Alpha"= sqr ( "PitchCircle" ^ 2 - "BaseCircle" ^ 2 ) / "BaseCircle" * 180 / PI - "PressureAngle" Alpha - Used for Calculating Beta “Beta"= ( "PitchAngle" / 4 - ( "Alpha" - 90 ) ) Beta - Used in definition of the parameters for the parametric equation driven curve “Gamma"= ( "PitchAngle" / 4 - ( "Alpha" + 90 ) ) Gamma - Used in definition of the parameters for the parametric equation driven curve “Phi"= sqr ( ( "AddendumCircle" / 2 ) ^ 2 - ( "BaseCircle" / 2 ) ^ 2 ) / ( "BaseCircle" / 2 ) Phi - Used in definition of the parameters for the parametric equation driven curve FEATURES “DCGTBC"= iif ( ( "DedendumCircle" + ( "Fillet" * 2 ) ) > "BaseCircle" , "unsuppressed" , "suppressed" ) if Dedendum Circle +2X Fillet IS GREATER THAN BaseCircle THEN Unsuppress OR Suppress FEATURE “DCLTBC"= iif (...

格式
Rendering、SOLIDWORKS、Other
分类
Energy and Power、Industrial design、Machine design
标签
solidworks、gear、spur、involute、2014
数据更新
2026-11-18T16:03:17Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。