GrabCAD 模型信息
Rolling Cage Radial Bearing · 模型 114967
Sixth of several different rolling element bearing concepts I came up with back in late 2013 - early 2014. Until very recently, I never got around to actually writing any documentation describing this idea or doing any model of this bearing concept. I only toyed with the concept in my mind for a while back then and put it on the back burner until recently. This bearing design is mostly similar to regular, caged roller radial bearings currently in widespread use. Unlike my other bearing designs, a single layer of load bearing rolling elements is actually used, rather than two or three. Which is the case with roller and ball bearing presently in use. The main innovative aspect of this bearing design, where it departs from current art, is in that any two consecutive load bearing rollers in the bearing are kept from touching and rubbing against each other by an intermediary, spherical rolling element which functions as a separator for the rollers and which itself rolls on their respective surfaces, in grooves cut in said surfaces specifically for this purpose. The purpose of these grooves is to help retain the spherical separators, not permitting them to slide or roll off of the rollers during operation of the bearing. They are valleys cut transversely into each roller's surface along its circumference, towards its ends. They have a circular cross-sectional profile and guide and retain the spheres as they roll on the rollers they keep apart. The joins between the surface of the valleys and the outer, cylindrical surface of the roller which they are cut out of is filleted appropriately. Any two consecutive rollers are kept apart from each other by the spherical rolling element in between them, which rolls on both of their surfaces inside the respective valleys in said surfaces. The spheres interspersed with the rollers and which keep them separated through rolling contact are positioned on the outside of the row of rollers, further out from the bearing centre than the rollers themselves. The spherical separators are kept in position by rings which span the full circumference of the outside of the bearing and which themselves have a valley or groove cut out from their inward facing side, through which the spheres are guided to roll. The retaining rings are themselves positioned further out from the center of the bearing than both the rollers and spherical separators they ride on as well. They constrain the spheres from the outside of the bearing, pre...
- 格式
- Other、STEP / IGES、Rhino、Rendering、KeyCreator
- 分类
- Industrial design、Machine design、Tech
- 标签
- cage、complement、radial、bearing、roller、rollers、rolling、element、needle
- 数据更新
- 2026-09-15T00:14:14Z
