RPI Cam + Arducam CSI-HDMI 模型预览

GrabCAD 模型信息

RPI Cam + Arducam CSI-HDMI · 模型 323113

作者:Nick Sørensen

This is a case for the Arducam CSI-to-HDMI upgrade module, mounted with the RPI Cam V2. 2 types of casings and shades: T1 and T2. T1 has a fixed shade, at the position where the case mount points to the right. If you want another fixed direction, please leave a comment and I will provide it for you here. T2 has a multi angle shade. You can turn it in any direction you want. The lid fits both types. Both types of shades can be pulled of easily with cautiousness, if the camera comes out of focus, and you need to make it focus again. You'll need 2 M2x8 screws. But both a 6 or a 10 mm. can do the job. The best is if you have some type of butt-head screws or other types of low-head screws. Be aware of the short CSI cables when you mount the RPI + Arducam assembly to the case. It's a really tight fit! All parts are designed for none support printing.

格式
SOLIDWORKS、STL、Rendering
分类
3D printing、Electrical
标签
arducam、rpicam、arducamhdmi、csitohdmi、pi、cam、hdmi、raspberry、camera、rpi
数据更新
2026-10-22T13:34:41Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。