GrabCAD 模型信息
RTC Tetris Clock with ESP32 (no WiFi) · 模型 41291
SolidWorks source files and 3D-printable models for the enclosure of Matrix Clock — a DIY LED matrix clock built on ESP32 with RTC and BLE, displaying time in a "Tetris" falling-blocks style. Additional parts needed for assembly: - PCB: -- Matrix_Clock_PCB - RGB LED Module 64 x 32 pixels, options: -- Small: Module P2.5, size: 160 x 80 mm -- Bigger: Module P3.0, size: 192 x 96 mm - Hardware & misc parts: -- DC-099 2.1mm x 5.5mm metal power connector -- Brass flat-head knurled screw, M5 × 12 mm (head Ø12) -- Washer M5: 2 items -- Nut M5: 1 item -- Screws M3 x 25: 4 items -- Screws M3 x 16: 4 items -- Screws M3 x 10: 4 items -- Plain washer M3: 8 items -- Brass Heat-Set Inserts: 4 items -- ? LDR Photo Light Sensitive Resistor (not used by firmware yet) - Cables: -- 2.54mm pitch, 16-pin (2×8) dual-row IDC flat ribbon cable 10 cm: 2 items (usually comes with the LED module) -- Power cable with connector JST-B2P-VH 3.96mm: 1 item (usually comes with the LED module) - Power supply: -- CR2032 -- DC power supply, 5V 2A Full project with some additional links for PCB Gerbers, Firmware, and Android can be found here https://github.com/golyakoff/Matrix_Clock_3D_Model
- 格式
- SOLIDWORKS、STEP / IGES、STL、Rendering
- 分类
- 3D printing、Hobby、Interior design
- 标签
- esp32、clock、tetris
- 数据更新
- 2026-09-30T12:22:57Z
