Salt Meter Battery Adaption 模型预览

GrabCAD 模型信息

Salt Meter Battery Adaption · 模型 393613

作者:Daniel Soussi

My salt meter uses four these AG13 batteries. It's my only device that uses this battery size, so I don't keep spares on-hand. When it came time to replacing these batteries, I was left wanting. Instead of buying some more AG13 batteries, I decided to modify the salt meter to work with the common 18650 (rechargeable LiPo) battery. To accommodate the larger 18650 battery, I made a modification to the salt meter battery lid. I extended it to enclose the 18650 battery assembly via a 3D printed part. It adds about 80mm to the overall salt meter length, but not a problem for my use. The 18650 battery provides a nominal 3.7V. A bit low to reliably operate the salt meter. The salt meter operates nominally at 6V (4 x AG13 batteries) and displays a low voltage indicator when the voltage drops below 4V. I use a MT3608 voltage step up inverter module to lift the voltage to 6V and all is good. The MT3608 does not have reverse battery protection and will fry itself if the 18650 is inserted into the battery holder the wrong way around. I included a power diode in series with the 18650 battery to provide reverse battery protection. I don't use the salt meter often, so I intend to reuse the new internal battery assembly in other projects. So, the salt meter battery enclosure is the main modification. My print is made in PETG 1.75mm Aurarum silver filament, with 0.2mm layer height and 100% infill on a PRUSA I3 MK3S printer. I hope you can find this print useful, too. Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.

格式
STL、Rendering
分类
Tech、Tools
标签
salt、meter、battery、adaption
数据更新
2026-09-12T02:54:19Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。