sealant_applicator 模型预览

GrabCAD 模型信息

sealant_applicator · 模型 384977

作者:Paolo

This innovative sealant applicator is compact and easy to use. The amount of sealant is driven by the wheel at the base of the applicator (the one in contact whit the floor/wall).That wheel is a FACE gear with a rubber ring on the external surface that increases the grip of the wheel. The power from the second gear to the top pulley is transmitted through a two pieces shaft. The CVT system at the top (combined with the cam grip driven) gives the possibility to vary the transmission ratio so that the user can choose the right amount of sealant to use. The power from the first pulley to the second is transmitted by a belt and then from the second pulley to the plate that pushes the piston of the cartridge is transmitted by an operating screw system. To balance the axial forces two axial cylindrical roller bearings. To have an even amount of seal the tip nozzle has a triangular shape. The cartridge replacement is really easy because the top cap is right handed and the one at the bottom is left handed so turning the cartridge seat the two caps will move in opposite directions. This is possible because the two pieces shaft extends and keep tuned the transmission system (through a reference slot).

格式
STEP / IGES、STL、Rendering
分类
Fixtures
标签
krimelte
数据更新
2026-11-11T18:23:07Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。