Servo control 模型预览

GrabCAD 模型信息

Servo control · 模型 323140

作者:Daniel Wimmer

The goal of this PCB is to generate a board that is capable of controlling a servo motor. Therefore i used 2 iCs. The first one is an OPV and the second one is a timer IC. You can adjust the board by a potentiometer. For a better use in a project i made a CAD model using basic components. Warning: i the CAD model i used only one basic resistor for the sake of time. Do not use the resistor that is built in the CAD in real life. If you want to build the servo control by yourself please look at the schematics for the right components, because that's cruicial at an analog circuit. The same goes with the diodes. In the real PCB i used the1N4148 Another thing to mention is the top view. On eagle i designed the PCB like a 2 layer PCB. On the real PCB i just used one layer. For the two missing connections i just used a piece of wire. Alternatively you can use a 0,5Ohm resistor. If you want further information or a costumized version feel free to contact me. I hope you like it.

格式
AutoCAD、SOLIDWORKS、STEP / IGES、STL、Rendering、Other
分类
Components、Electrical、Hobby
标签
pcb、servo、driver、control、motor
数据更新
2026-11-08T11:45:18Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。