GrabCAD 模型信息
Shelf Extension for Plant Pot · 模型 60518
A tape-mounted round shelf that extends a narrow window sill just enough to hold a plant pot, up to 178 mm across. No drilling. WHAT YOU GET - Holds a round pot up to 178 mm across - 178 mm inner well with a 5 mm rim so the pot cannot slide off - Triangular gusset carries the load onto the wall below the sill, not just the sill edge - Recessed well doubles as a shallow catch for water running out of the saucer - One printed part, 190 mm tray, 125 mm total height, no fasteners FIT CHECK - As printed: 190.0 x 190.0 x 125.0 mm; gusset 21 mm thick, dropping 100 mm below the tray - Sill depth is not critical - the tray only needs enough sill to rest on, the gusset carries the rest - Mounts with strong double-sided tape on the tray underside and on the gusset back face - Every photo is the actual printed part in PLA on a real window sill, no renders SAFETY Read this before you load it: - How much it holds depends on your tape, your wall surface, and where the pot's centre of gravity sits - Clean and dry both contact surfaces, then let the tape cure fully before loading - most tapes need 24 hours - Keep the pot centred in the well, start with a light pot, and check the bond periodically - Do not use it above a walkway, a bed, or anywhere a fall would land on a person or a pet PRINT SETTINGS Bambu Lab P1S with a 0.4 mm nozzle, stock 0.2 mm Standard profile. - PLA (Bambu PLA Matte on the test print) - 0.2 mm layers / 4 walls (load bearing - do not go below this) / 15% infill - Supports: yes, normal (auto) - the gusset overhangs the tray, and the bundled 3mf has them switched on NEED A DIFFERENT SIZE? STEP file is included, so you can resize the well for a different pot or change the gusset drop for a different sill. LICENSE: CC BY-NC
- 格式
- STL、Rendering、STEP / IGES、3D Manufacturing Format
- 分类
- 3D printing、Household、Nature
- 标签
- bracket、houseplant、shelf、planter、window sill、plant pot
- 数据更新
- 2026-09-30T18:00:48Z
