GrabCAD 模型信息
Single Acting Hydraulic Cylinder(With End Cap Input Port) 140x125x1522mm · 模型 59471
Technical description: Single-acting hydraulic cylinder (with end cap port) Model/type: Single-acting hydraulic cylinder with end cap port design. This design facilitates connection and provides installation flexibility, especially in applications with limited space or where the hydraulic tube orientation is more convenient from the end cap side. Basic Dimensions: Bore Diameter: 140 mm Rod Diameter: 125 mm (This large diameter ensures high buckling resistance and carries heavy lifting loads) Stroke Length: 1522 mm (1.522 m) - A long stroke suitable for applications requiring a large range of motion. How it works: Single Acting: The cylinder operates with force in only one direction (usually the extension direction). Pressurized hydraulic oil enters through the inlet port in the end cap, pushing the piston and extending the cylinder rod to lift or move the load. Retraction: The cylinder rod returns to its original position (retracts) either by an external force (such as the weight of the load itself, a return spring, or a mechanical mechanism), or by releasing the hydraulic pressure, allowing the external force to push the oil out of the same port. Key Features: Port design in the cover: Simplifies piping routes, may reduce overall cylinder length compared to side port designs, and provides better mounting options in some cases. Suitable for heavy loads: The combination of a large piston diameter (140 mm) and a large piston rod diameter (125 mm) gives it high lifting capacity and great durability. Long stroke: Meets the requirements of applications that need a large range of motion up to ~1.5 meters. Simplicity and cost: The single-acting design is generally simpler and less expensive than a double-acting cylinder, requiring only one port and one connection. Common applications: Hydraulic lifts and car jacks (such as drum jacks). Hydraulic presses in pressing and bending operations. Lifting systems in agricultural and industrial equipment. Hydraulically operated gates and safety hatches. Construction equipment such as temporary hydraulic props. Equipment whose return depends on gravity or the weight of a moving part. Installation and operation notes: Ensure that the return mechanism (external force) is sufficient to return the cylinder efficiently and within the required time. A hydraulic system with a control valve is required to allow oil to enter for extension and exit for return. It is recommended to install a flow control valve on the return port
- 格式
- SOLIDWORKS、Rendering
- 分类
- Aerospace、Architecture、Electrical
- 标签
- 未标注
- 数据更新
- 2026-10-05T10:07:18Z
