GrabCAD 模型信息
SkyWatcher 9x50 Finderscope to Male M42x0.75 Adaptor · 模型 259097
This is a 3D printable adapter I designed to convert the SkyWatcher 9x50 Finderscope into a Guide scope. You can attach many common Guide cameras that have a female M42x0.75 thread such as the Original QHY5 and the medium size ZWO Planetary/Guiding cameras amongst others. The adaptor is printed in 3 parts A, B, and C. Once all parts are printed, fit Part C into Part B, this should be a tight fit but should still rotate when some force is applied. Then you should carefully run glue (I used Superglue) around the shoulder of Part C. Part A will then be snapped onto Part B where it will retain part C but allow it to rotate. This means you can rotate your camera to the desired rotation even if the Guidescope is locked in place. I have printed my own using a 0.15mm layer height, 4 walls, 3 top & bottom layers and 100% concentric infill (or whatever you might prefer). I would advise that you use a minimum layer height of 0.15mm or finer otherwise the threads will not print well.
- 格式
- STEP / IGES、STL、Rendering、SOLIDWORKS、Parasolid
- 分类
- 3D printing、Components、Hobby
- 标签
- guidescope、finderscope、skywatcher、sky-watcher、astronomy、astrophotography、9x50、finder、telescope、c-mount、cmount、adaptor
- 数据更新
- 2026-10-23T08:08:38Z