GrabCAD 模型信息
soaps manufacture · 模型 320934
... here we have a somewhat larger project: I have analyzed 12 commercial, non-German, but foreign soaps and try to find the most efficient and small solution for our own devices and machines so that we can manufacture the necessary soap in machines - can produce fully automatically. The first thing is to analyze shapes and forms, to test the handiness, also the compositions, the foaming agents - then it is a matter of determining the line according to which we want to build our devices and machines - yes, we have to! We use our mini short conveyor belt - that we use in many of our projects - for example: https://grabcad.com/library/cheese-pressing-1 the constructions here are simplified: so not finished yet - it's just too much to do at the same time, a lot of projects! The concept here was created to determine whether the intended automatic production - is feasible - and the components and assemblies are correct - especially since we want and have to use components and groups from other projects! but it works very well! about the manufacturing process: We have two mini-short conveyor belts running synchronously, which are shaped like a drawer: this is necessary because soap cannot necessarily be removed from the mold immediately - the soaps need time to set so that they can be removed from the mold. That means: we fill with soap mass through the upper soap mold - 5 molds each under pressure and then transport one position 114.3 mm further - to fill the next soap mold. 9 positions are filled - is stopped - locked - and both conveyor belts lying on top of each other as a complete module are transferred to the left or right in a tray system. we can produce 45 soaps of one type and store 3 times per side. that results in 270 soaps in the basic configuration. Depending on the process, we first need a solidified state of the soap mass. There is the possibility of moving the main device - so more than just making 270 soaps! any! By using the same modules with other soap molds - stacked one on top of the other - we can build a large number of modules in a very small space - that is, we can produce a large number of soaps in a very small space. the documents here are structurally in order - but not yet fully developed in detail! this should be done gradually!
- 格式
- STL、Rendering、STEP / IGES
- 分类
- Construction、Industrial design、Machine design
- 标签
- 未标注
- 数据更新
- 2026-10-09T16:11:54Z