Solaris ---> SKY Shield 模型预览

GrabCAD 模型信息

Solaris ---> SKY Shield · 模型 322698

作者:Jonathan Brazeau

When I first read about the challenge and it mentioned about having an accessory that had to do with guiding large groups of people, I couldn’t get the thought of a display screen out of my head. But I thought, nah, too complicated, too big and too bulky and it was electronic so it wouldn't fit a "3dprinting" competition. Then I started researching and came across these super awesome programmable LED matrix panels (shields) from adafruit: https://www.adafruit.com/products/420 o Dimensions: 192mm x 96mm x 12mm (7.6" x 3.8" x 0.5") o Panel weight with IDC cable and power cable: 170 g o 5V regulated power input, 2.5A max (all LEDs on) o 5V data logic level input o 2000 mcd LEDs on 6mm pitch o 1/8 scan rate o Indoor display, 150 degree visibility o Displays are 'chainable' - connect one output to the next input - but our Arduino example code does not support this yet After reviewing the specs, I started to realize that it might actually be possible. After all, they were lightweight, only 170g’s each, they’re small and compact, inexpensive, and best of all, they can be daisy chained to form a larger array. They used 5V power, which can be tapped right from the MAV’s FC and the arduino board is fairly small also. So from a technical standpoint, the electronics seemed feasible. It was just a matter of figuring out how to mount them. Not being satisfied with just one panel, I didn’t think that would be large enough, I thought, how can I get a large viewing area without taking up a lot of space…… why not daisy chain three of them side by side, then somehow make them fold up to take less space during flight. Again, this became the second hurdle in the process. The electronics were covered, but I wasn’t quite convinced I could pull of three of them in a folding unit…. I made a really quick mock up cad model just for proof of concept…still wasn’t convinced. So left it for a while, came back to it and kept at it until it started to fall together and looked more and more feasible. So basically, the Solaris Sky shield consists of three, 3D printed panels, they’re all printed at once in one print so that part is very 3DPcentric. The panels hold the three LED Matrix panels (just stuck on or screwed on) and there are integrated mounts for two small HS-55 servo motors, these servo motors are used to fold the two outside panels in and out. Each tiny servo can lift 1.25kg @ 5v so they have plenty of torque to swing the panels...

格式
Rendering、STL、STEP / IGES
分类
3D printing、Components、Industrial design
标签
display、shield、panel、sky、challenge、3dprinted、solaris、fathom、unmakeable、droneaccessory
数据更新
2026-11-09T05:46:19Z
前往 GrabCAD 查看

CADSEEK 是第三方中文模型检索工具,与 GrabCAD 无隶属或官方合作关系。模型文件、许可与最终详情以 GrabCAD 原始页面为准。